| Appearance: | Vertical |
|---|---|
| Condition: | New |
| Customized: | Customized |
| Delivery Time: | 5~15 Working Days |
| Drying Rate (%/H): | 0.6-1.2 |
| Hot Wind Temp: | 50~70 ºC |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Product Name: | Paddy Grain Dryer | Hot Wind Temp.: | 50~70 ºC |
|---|---|---|---|
| Grain Temp.(max): | 30~45 ºC | Crack Ratio: | <2.0 % |
| Drying Rate(/h): | 0.6~1.2% | Drying Capacity: | >=900 Kgs / H |
| High Light: |
recirculating batch dryer,corn batch dryers |
||
15 ton per batch grain dryer for rice with imported components
Application:
Drying high moisture rice, wheat, corn, soybeans and other grains.
Suitable for farms, food stations, grain storage specialized households. Grain dryer uses hot air as the drying medium and applies recycling drying process to heat grain evenly so as to obtain good quality grain after baking.
Type:
Different grain has different drying processs and drying temperature. According to the quantity of drying grain, different types of drying process and dryers can be chosen. for example, for the grain with various species and a small quatity or scattered grain storage, small batches/cycle type dryer can be chosen; for the grain with large amount in a short drying time but single species, large continous batch unit is appropriate.
Technical Advantages:
1) Successfully developed an integrated adapted drying control system which can maximize drying efficiency, reduce energy consumption and increase labor productivity, which is an advanced technology in China.
2) The special dust removal and impurity removal system design can perfectly clean out the grain impurities out into the boiler cycle as a biomass fuel, provide heat energy for drying, thus it is more engery-efficient and more enviromentally friendly.
3) Diversified drying methods option, including steam drying, biomass fuel hot air drying, fuel drying etc.
4) Utilize stainless steel mesh for the drying layer and the bottom of dryers, use the material properties, such as stainless steel thermal conductivity and wear resistance, to improve the drying rate and extend the service life.
5) Adopt imported brand motors for elevator and rotary valve, which can run 20,000 hours without adding oil.
6) The imported NSK bearings have longer service life and lower noise.
7) Auger leaves adopts high quality stainless steel material, which are more durable and wear-resistant.
Coal, husk, branch, biomass, diesel or natural gas
| Low-temperture Grain Dryer Specification | |||
| Model | 5HPS-15A | ||
| Loading capacity | Paddy(kg) | 3700-15000 | |
| Wheat(kg) | 4490-17000 | ||
| Dimension(mm) | H | 10830 | |
| L | 3110 | ||
| W | 1848 | ||
| Electric Power | Voltage | three phase 380V,single phase 220V/50Hz | |
| Total Motor power (kw) | 8.65 | ||
| Function | Loading time(min) | paddy | 55-60 |
| wheat | 50-55 | ||
| Unloading time(min) | paddy | 50-55 | |
| wheat | 45-50 | ||
| Drying rate (%/h) | 0.6-1.2 | ||
| Device | Safety Device | full load buzzer,thermal-over relay,temperature controller,hot air temperature sensor,overload protection device,leakage protection device | |
| Standard Device | online moisture monitor,grain temperature sensor,fault removal sensor | ||
| 1.Specification is subject to change without notice. | |||
| 2.The parameters are just for reference.The moisture of the paddy is from 24% to 15% and 28% to 12.5% for wheat.Actual datas will be differed from variety,moisture content and temperature. | |||
Packaging & Shipping
Machine packing inside is plastic films and outside is fumigation wooden case.
Our wooden case is very strong,it can bear long time shipping on the sea.And machine with preservative film,it can stop the salt sea water enter into the machine and make the machine corrosion.
Our parts warehouse
We have parts warehoue to make sure deliver parts of machine to custome timely. and provide customer best after sale service.
Our company
"Quality is our culture". Our boss is very strict on production and management. We have a professional designer team and engineers. And our factory have cooperated with University of Science and Technology in agricultural machinery industry. So we make sure you high quality of product and timely delivery.Weclome to inquiry!!!
CNC-machining-center Gantry-mahining-center Welding Robot
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}